The intelitek Universal Electrical/Electronics bread board plug and play training kit designed to perform the experiments from the basic to advance level of electrical and electronics exercises, This kit is made easy to conduct experiments by pluging in the components in to the bread board with 4mm pin, and console board is having complete AC-DC Variable Supply and signal generator with 1Mhz frequency range is provided, The photorealistic design of the front panels with graphics, pictures, connection details or warning messages assist and guide the experiments cognitive didactics. Due to the graphics, users comprehend and remember the technologies more easily.

The systems can be mounted in an A4 frame or placed directly on a table.

 

Specifications:

Transformer for AC voltage sources 2 x 15 V AC / 500mA; 50 Hz (Main frequency) fused via Poly Switch

Three-phase supply 18V with Frequency: 50 Hhz

Adjustable DC power supply, potential-free, 0…30 V / 1.0 A with

voltage and current display as well as active current limiting for safe experimentation

DC voltage source, +/15 V, fixed 1.0 A DC voltage source, -15 V, fixed 1.0 A DC voltage source, adjustable,

all outputs short-circuits and regenerative proof up to 40 V DC

Overload indication via colored LED at output

30V variable regulated DC supply inbuilt with console.

On board Function generator

LCD display

Frequency: 0.1 Hz…1MHz

Adjuster for amplitude 0…10V, setting accuracy 10 mV

maximum current load 0.5 A (peak current)

Source resistance 15 Ω

Waveforms: Sine, triangle and Square

Learning objectives:

  • Basic law of electrical engineering
  • Handling and measuring with oscilloscope, multimeter and
  • function generator,
  • Direct, alternating and three phase current technology
  • Operational amplifier Voltage-, temperature- and
  • light-dependent resistors Behavior of semiconductors:
  • Diodes, transistors, Thyristors Circuits of electronics: amplifiers,
  • flip-flop circuits, power supply circuits
  • Electrical engineering/Electronics/Digital technology 

List of Components:

  • Set of accessories, plugged on
  • imprinted Storage Board:
  • 28 film resistors
  • 10 Ω…1 MΩ
  • 1 VDR resistor
  • 1 LDR resistor
  • 1 PTC resistor
  • 1 NTC resistor
  • 11 capacitors
  • 100 pF…1 μF
  • 4 electrolytic capacitors
  • 10 μF…470 μF
  • 1 potentiometer linear 1 kΩ,
  • 0.5 W
  • 1 potentiometer linear 10 kΩ,
  • 0.5 W
  • 1 transformer coil N = 300
  • 2 transformer coils N = 900
  • 1 cut band core (1 Paar)
  • 1 coil 100mH
  • No. Designation Order No.
  • 1 Device Set Electronics 32203
  • 1 transistor NPN BC 237,
  • 1 transistor NPN BC 140,
  • 1 transistor NPN BC 140,
  • 1 transistor PNP BC 160,
  • 1 unijunction transistor
  • PN 2N4870
  • 1 D-MOS field effect transistor
  • BS 250, P-channel
  • 1 junction field effect transistor
  • 2N 5485, N-channel
  • 1 junction field effect transistor
  • 2N 5461, P-channel
  • Resistors
  • Series , 1 Ω … 10 MΩ/2 W
  • (1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2)
  • Potentiometers
  • Linear, 470 Ω, 1 kΩ, 4.7 kΩ, 10 kΩ, 47 kΩ, 0.5 W
  • Non-linear resistors
  • VDR-, LDR-, NTC-, PTC resistors
  • Capacitors
  • Series E6, 10 pF … 1 μF
  • (1.0 1.5 2.2 3.3 4.7 6.8)
  • Electrolytic capacitors
  • values: 10 μF, 100 μF, 470 μF
  • Coils
  • 100 mH
  • Transformer coils with 300 / 900 windings
  • Semiconductor components
  • Germanium and silicon diodes
  • NPN and PNP transistors
  • PN unijunction transistor
  • D-MOS field effect transistor
  • Junction field effect transistor,
  • Diac, thyristor, triac, IGBT
  • Operational amplifier
  • Zener dide ZPD
  • values: 3.3 V, 10 V
  • Photo diode, photo transistor
  • LEDs in red, green, yellow, blue, white
  • Switching and display components
  • Switch, pushbutton, relays
  • Lamp

Reviews

There are no reviews yet.

Be the first to review “UNIVERSAL ELECTRICAL/ELECTRONIC BREAD BOARD TRAINING...”

Your email address will not be published. Required fields are marked *